Dwyer - Dwyer SBLT2-15-60-ETFE Submersible level transmitter

Dwyer delivers high value environmental solutions combined with the best experience in the industry for our customers and partners.


Dwyer SBLT2-15-60-ETFE Submersible level transmitter - SBLT2-15-60-ETFE

Product Dwyer SBLT2-15-60-ETFE Submersible level transmitter
Brand Dwyer
Product Price 0 LKR
Datasheet Download

Description

General

The Series SBLT2 & SBLTX Submersible Level Transmitters are manufactured for years of trouble free service. These series measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing.  

Features

  •  Slim design for tight applications with bullet nose, which protects the diaphragm from damage
  • Incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power  supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty) on  SBLT2 models
  • Maintenance free filter eliminates particulate or water droplets from entering and damaging the transducer
  • UL approved intrinsically safe on SBLTX models for use in hazardous locations when used with proper barrier
  • Excellent chemical compatibility for wide application use  
  • NPT connection allows the unit to be rigidly installed in a pipe/conduit, or the addition of a A-625 hanging loop for attaching a  chain for pulling out of the installation
  • Standard 72 hour lead time ensures minimal downtime.

Specifications

  • Make: Dwyer
  • Model: SBLT2-15-60-ETFE
  • Range: range 15 psi (34.63 ft wc) [10.56 m wc]
  • Cable Material: 60 ft (18.3 m) ETFE cable.
  • Wetted Materials: Body: 316 SS, 316 L SS; Bullet nose: PVC;
  • Accuracy: ±0.25% FS*.
  • Temperature Limit: Polyurethane: 0 to 150°F (-18 to 66°C); ETFE: 0 to 200°F (-18 to 93°C);
  • Compensated Temperature Range: 0 to 140°F (-18 to 60°C);
  • Thermal Effect: ±0.02% FS/°F.
  • Pressure Limit: 2X FS.
  • Power Requirement: SBLT2: 10-30 VDC
  • Output Signal: 4-20 mA DC, 2-wire.
  • Response Time:50 ms. Max.
  • Loop Resistance: 900 Ω at 30 VDC.
  • Electrical Connection: Wire pigtail.
  • Mounting Orientation: Suspended in tank below level being measured.
  • Electrical Protection: Lightning and surge protection;
  • Agency Approvals: CE

Contacts and Delivery

Fieldinstruments.lk
50/3, Angampitiya Rd, Ethul Kotte, Sri Lanka. 10100.
Phone: +94718555888 Email: info@fieldinstruments.lk