Field Instruments

General

The high performance differential pressure transmitter EJX110A features single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam fl ow as well as liquid level, density and pressure. EJX110A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications. Other key features include quick response, remote set-up using communications, diagnostics and optional status output for pressure high/low alarm. The multi-sensing technology provides the advanced diagnostic function to detect such abnormalities as an impulse line blockage or heat trace breakage. FOUNDATION Fieldbus and PROFIBUS PA protocol types are also available. All EJX series models in their standard configuration, with the exception of the Fieldbus and PROFIBUS types, are certified as complying with SIL 2 for safety requirement.

Specifications

• Make: Yokogawa
• Model: EJX110A-FVM5G-91DDJ/KS26/D3/M01/T12/EE/HC
• Product type : EJX110A Differential Pressure Transmitter
• Output signal : F = Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C25T02-01EN)
• Measurement span (capsule) : V = 0.07 to 14 MPa (10 to 2000 psi)
• Wetted parts material : M = ASTM CF-8M Cover flange and process connector, Monel Capsule, PTFE Teflon Capsule gasket, 316 SST Vent/Drain plug
• Process connections : 5 = without process connector (1/4 NPT female on the cover flanges)
• Bolts and nuts material : G = 316L SST
• Installation : 9 = Horizontal piping and left side high pressure
• Amplifier housing : 1 = Cast aluminum alloy
• Electrical connection : D = M20 female, two electrical connections and a SUS316 blind plug
• Integral indicator : D = Digital indicator
• Mounting bracket : J = 316 SST 2-inch pipe mounting, flat type (for horizontal piping)
• KS26
• Calibration units : D3 = bar calibration (bar unit)
• Material certificate : M01= Cover flange
• Pressure test/ Leak test certificate : T12 = Test Pressure: 16 MPa(2300 psi),Nitrogen(N2) Gas, Retention time: one minute
• EE
• 316 SST exterior parts : HC = 316 SST zero-adjustment screw and setscrews

Fieldinstruments.lk
50/3, Angampitiya Rd, Ethul Kotte, Sri Lanka. 10100.
Phone: +94718555888 Email: info@fieldinstruments.lk