Field Instruments

General

Part of the SmartLine® family of products, the SmartLine STT850 is a high-performance temperature transmitter offering high accuracy and stability over a wide range of process and ambient temperatures.  The SmartLine family is also fully tested and compliant with Experion ®   PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding needs for temperature measurement applications.

Features

• Digital Accuracy up to +/- 0.10 Deg C for RTD
• Stability up to +/- 0.01% of URL per year for ten years
• 125 mSec update time for single input models
• 250 mSec update time for dual input models
• Built in Galvanic Isolation  
• Differential/Averaging/Redundant/Split Range  measurements
• Dual Compartment Housing
• Sensor Break detection  
• Comprehensive on-board diagnostic capabilities
• Full compliance to SIL 2/3 requirements.  
• Available with 15 year warranty
• Supports Namur 107 Extended Diagnostics
• Supports Namur 89 Wire break
• Direct entry of Callendar-Van Dusen coefficients R0, α, δ and β for calibrated RTD sensors (not available on DE units)

Specifications

• Make: Honeywell
• Model: STT850-S-0-A-BHB-11C-A-21A0-F1,F5
• Product Type : Smart Temperature Transmitter
• Input Details : S = Single
• Digital Output : 0 = No
• Approvals : A = FM Explosion proof, Intrinsically Safe, Non-incendive, & Dustproof
• Electronic Housing Material & Connection Type : B
• Housing and Material : Polyester Powder Coated Aluminum
• Connection : M20
• Lightning protection : None
• Output/ Protocol : H
• Analog Output : 4-20mA dc
• Digital Protocol : HART protocol
• Customer Interface Selections : B
• Indicator : Basic
• Config Buttons : None
• Languages : English
• Application Software : 1 = Standard Diagnostics
• Output Limit, Failsafe & Write Protect Settings : 1
• Write Protect : Disabled
• Fail Mode : High>21.0mAdc
• High & Low Output Limits : Honeywell Std (3.8 - 20.8 mAdc)
• General Configuration : C = Custom Configuration
• Accuracy and Calibration : A
• Accuracy : Standard
• Calibrated Range : Factory std
• Calibration Qty : Single calibration
• Mounting Bracket : 2
• Customer Tag : 1 = One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
• Unassembled Conduit Plugs & Adapters : A0 = No Conduit Plugs or Adapters Required
• Certifications and Warranty
• F1 : Calibration Test Report & Certificate of Conformance
• F5 : Certificate of Origin

Fieldinstruments.lk
50/3, Angampitiya Rd, Ethul Kotte, Sri Lanka. 10100.
Phone: +94718555888 Email: info@fieldinstruments.lk