Field Instruments

General

Part of the SmartLine® family of products, the SmartLine STT850 is a high-performance temperature transmitter offering high accuracy and stability over a wide range of process and ambient temperatures.  The SmartLine family is also fully tested and compliant with Experion ®   PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding needs for temperature measurement applications.

Features

• Digital Accuracy up to +/- 0.10 Deg C for RTD
• Stability up to +/- 0.01% of URL per year for ten years
• 125 mSec update time for single input models
• 250 mSec update time for dual input models
• Built in Galvanic Isolation  
• Differential/Averaging/Redundant/Split Range  measurements
• Dual Compartment Housing
• Sensor Break detection  
• Comprehensive on-board diagnostic capabilities
• Full compliance to SIL 2/3 requirements.  
• Available with 15 year warranty
• Supports Namur 107 Extended Diagnostics
• Supports Namur 89 Wire break
• Direct entry of Callendar-Van Dusen coefficients R0, α, δ and β for calibrated RTD sensors (not available on DE units)

Specifications

• Make: Honeywell
• Model: STT850-S-0-C-AHB-11C-A-20A0-00-0000
• Product type : STT850 SmartLine Temperature Transmitter
• Input Type : STT850 = Universal Input
• No of Inputs : S = Single
• Digital Outputs : 0 = No
• Approvals : C = ATEX Explosion proof, Intrinsically Safe & Non-incendive
• Electronic Housing Material & Connection Type
• Material : A = Polyester Powder Coated Aluminum
• Connection = 1/2 NPT
• Lightning protection = None.
• Analog Output : H = 4-20mA dc
• Digital Protocol = HART Protocol.
• Indicator : B = Basic
• Ext Zero, Span & Config Buttons : None
• Languages = English.
• Application software : 1 = Standard Diagnostics
• Output Limit, Failsafe & Write Protect Settings
• Write Protect : 1 = Disabled
• Fail Mode : High> 21.0mAdc
• High & Low Output Limits : Honeywell Std (3.8 - 20.8 mAdc)
• General Configuration : C = Custom Configuration (Unit Data Required from customer)
• Accuracy and Calibration
• Accuracy : A = standard
• Calibrated Range = factory std
• Calibration Qty = single calibration.
• Mounting Bracket
• Mounting Type : 2 = Angle Bracket
• Material = 304 SS
• Customer Tag : 0 = None
• Unassembled Conduit Plugs & Adapters : A0 = No Conduit Plugs or Adapters Required
• Certifications & Warranty : 00 = None
• Factory : 0000 = Factory Identification

Fieldinstruments.lk
50/3, Angampitiya Rd, Ethul Kotte, Sri Lanka. 10100.
Phone: +94718555888 Email: info@fieldinstruments.lk